fbpx
Back to Office Electronics

Printer Parts Stepper Motor Driver With Heat

Printer Parts Stepper Motor Driver With Heat

3D Printer Parts A4988 DRV8825 Stepper Motor Driver With Heat sink For SKR V1.3 1.4 GTR V1.0 RAMPS 1.4 1.6 MKS GEN V1.4 board

A4988 GreenA4988 RedDrv8825
Clear

$11.99

<strong>Verified low price!</strong> You’re unlikely to find a cheaper price elsewhere
Verified low price! You’re unlikely to find a cheaper price elsewhere
Add to Wishlist
Guaranteed SAFE checkout
Estimated Delivery Date:

Estimated Delivery Date: Wednesday, August 31

Due to hight demand, please allow at least 2-4 weeks for delivery.
Insured & Trackable Worldwide Shipping

Insured & Trackable Worldwide Shipping

Your tracking number will be sent to you after 3-5 processing days.
Love It or Get a 100% Refund!

Love It or Get a 100% Refund!

We're absolutely sure that you'll love this product. If you don't, just return it for a FULL refund!

WorldWide  Free   Shipping 


About Drv8825

Introduction:

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.

The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

The DRV8825 features adjustable current limiting, overcurrent, and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

Features:

  • Simple step and direction control interface
  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Can interface directly with 3.3 V and 5 V systems
  • Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
  • Short-to-ground and shorted-load protection
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Exposed solderable ground pad below the driver IC on the bottom of the PCB
  • Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  • 45 V maximum supply voltage
  • Built-in regulator (no external logic voltage supply needed)

Subdivision:

About A4988

Introduction:

This product is a breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefully before using this product. This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-, and sixteenth-step modes, with an output drive capacity of up to 35 V and 2 A.

The translator is the key to the easy implementation of the A4988. Simply inputting one pulse on the STEP input drives the motor one microstep. There are no phase sequence tables, high-frequency control lines, or complex interfaces to program. The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened.

Feature:

  • Simple step and direction control interface;
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step;
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated;
  • Voltage to achieve higher step rates;
  • 3.3 and 5 V compatible logic supply
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay);
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection;
  • Short-to-ground and shorted-load protection.

Subdivision:

1*A4988/DRV8825 Stepper Motor Driver

1*Heat sink

Brand Name

BIQU

Item Type

Driver

Model Number

A4988/DRV8825 Stepper Motor Driver

Material

4-layer PCB

Type

Micro stepper motor

Usage

3D Printer parts

Suitable for

Ramps 1.4/Ramps 1..5/Ramps 1.6/MKS Gen V1.4/MKS Gen L/Rumba

Product name

A4988/DRV8825 Stepper Motor Driver

Package

Suitable Package

A4988 Color

Green/Red

Stock

In stock

Condition

New100%

Customer commitment

Customer commitment

We’re a company with a customer-obsessed culture and try to meet and exceed your expectations every time you shop our store. Your opinion is our biggest drive for improvement. Feel like a true insider with our exclusive offers and closed promotions.
Passion for our work

Passion for our work

We’re real fans of what we do! Our store is full of amazing carefully hand-picked products that you won’t find anywhere else, that’s for sure.We strongly believe that great stuff shouldn’t cost a fortune that’s why you can trust us to offer goods for every budget.
Inspiration and creativeness

Inspiration and creativeness

Get the treat that you deserve and indulge yourself in your favorite merch, we cater for all tastes. Shopping has never been more enjoyable!

How much do you charge for shipping?

We provide free shipping to over 200 countries around the world*
*with some exceptions

Will I be charged any shipping, customs or duties fees?

No, the price you see is the price you pay - you won’t be charged any extra fees.

When will my item ship?

If you order an in-stock item your order will ship within 3 working days.

How long will my order take to arrive?

Orders are shipped by EMS, USPS, which usually takes 5-20 working days after dispatch, but may take longer due to factors beyond our control.

Do you provide tracking information?

You will receive your tracking information within 3-5 working days, but sometimes due to free shipping tracking is not available. If not please contact us at support@expressnztech.com

Can I cancel my order?

You can change or cancel an order within 12 hours. Please contact us at support@expressnztech.com

18 Customer reviews

18 reviews
5 out of 5 stars
100% of customers would recommend this to a friend
5 Stars
18
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Write a review

  1. comment icon M***a

  2. comment icon M***c

  3. comment icon R***G

  4. comment icon M***m

  5. comment icon N***v

  6. comment icon R***v

  7. comment icon V***h

  8. comment icon A***B

  9. comment icon G***w

  10. comment icon I***v

  11. comment icon P***a

  12. comment icon A***s

  13. comment icon N***o

  14. comment icon S***i

  15. comment icon Y***a

  16. comment icon G***r

  17. comment icon V***v

  18. comment icon M***A

By using this website you agree to accept our Privacy Policy and Terms & Conditions

Shopping cart

×

No products in the cart.